Canvas Panel 2.3mm MDF Board 12 X 16inch 1PC

• This Little Birdie MDF Round Coaster is 4" Dia and apprx 5mm thick.
• Create coasters with these MDF squares by adhering Decoupage papers and glue from Little Birdie supplies and give it a coat of varnish to seal it.
• Create amazing effects on these coasters by using Little Birdie Pouring paints with mixing medium and seal it with resin hardeners.
• These are suitable for Mixed media and School projects as they can be painted, distressed, stained, stencilled and varnished using Little Birdie range of Products.
• Made in India

• This Little Birdie MDF Coaster  Square and apprx 5mm thick.
• Create coasters with these MDF squares by adhering Decoupage papers and glue from Little Birdie supplies and give it a coat of varnish to seal it.
• Create amazing effects on these coasters by using Little Birdie Pouring paints with mixing medium and seal it with resin hardeners.
• These are suitable for Mixed media and School projects as they can be painted, distressed, stained, stencilled and varnished using Little Birdie range of Products.
• Made in India

• Odour & fume free.
• Auto bubble release
• Self-levelling resin
• Non-yellowing
• Mixes well with Little Birdie Resin colour / pigments
• Long shelf life
• Water & stain resistant
• No pot life: 45 minutes
• Full internal cure: 48 hours
• Touch dry: 12 hours
• Cure to handle: 10 hours
• Overcoat time: after full curing

How to use art resin:

Mix Resin and Hardener in the ratio 2:1 by volume preferably in paper/silicone cup with a wooden stirrer.

Stir the mixture well for about 3 minutes. Let it sit for 1 minute for bubbles to release.

Place the base on a levelled surface & pour the resin over your work.

Bubbles if any, will start rising to the surface & will pop on their own. If not, use a hot air gun over the un-popped bubbles.

The Resin needs to sit in a dust-free space while it cures. Within 24 to 48 hours fully cured (Curing time depends on weather conditions)

If required, apply 2nd coat only after the resin is fully cured.

• This craft resin & hardener is ideal for jewellery making, dome stickers, dome embellishments and to coat wooden furniture for sheen & protection.
• It is water resistant when dry and gives a glossy finish to your projects. Procedure - To make a resin embellishment, mix the craft resin with craft hardener in 1:1 ratio with the help of a wooden stick.
• Then pour the mixed solution in any mould of your choice.
• Let your project sit for about 30 minutes making sure there are no bubbles. Your resin embellishment is ready.

• Acid-free.
• Highly-pigmented.
• Works best on non-porous surfaces like yupo paper, ceramic, metal, glass etc.
• Can be used for resin craft, on fabric, and canvas.
• Dilute, lighten, blend, and clean up with alcohol blending solution.
• Alcohol inks are light sensitive. Sealing the work is recommended.
• 15 ml leak-proof bottle designed with convenient micro drip nozzle to help control and dispense only the amount of ink you want.
• Quick drying, permanent inks, great for creating beautiful abstracts.
• Reacts when in contact with blending solution or other inks.
• Turn ordinary ceramic surfaces, metals, glass and more into master pieces using these inks.
• Upcycle and give an interesting look to your planters, clocks, glass candle holders, coasters or make unique, abstract wall art, pendants, metal embellishments, glass ornaments, and other home décor projects.

• High concentration pigment
• Varied colour dosage will result in varied colour intensities. Use according to the colour effect required
• Great for adding colours to epoxy art
• Non toxic, low odour